Carbon nanotube embedded adhesives for real‑time monitoring of adhesion failure in high performance adhesively bonded joints
journal contributionposted on 2023-01-17, 16:06 authored by Tadej Bregar, Donglan An, Somayeh Gharavian, Marek Burda, Isidro Durazo‑cardenas, Vijay Kumar Thakur, David Ayre, Marcin Słoma, Mark Hardiman, Conor Mc CarthyConor Mc Carthy, Hamed Yazdani Nezhad
Carbon nanotubes (CNTs) embedded polymers are of increasing interest to scientific and industrial communities for multi‑functional applications. in this article, cnts have been introduced to high‑ strength epoxy adhesive for enabling in‑situ strain sensing in adhesively bonded aluminium‑to‑ aluminium single‑lap joints to accurately indicate the onset and propagation of adhesion failure to the evolution of piezo-resistivity in varying mechanical loads. The CNT modified adhesive in bonded joints and the CNT modified adhesive alone have been tested under monothonic and cyclic tensile loads up to ultimate failure. the changes in the piezo‑resistivity induced by the cnts have been monitored in situ with respect to loading. A novel interpretation method has been developed for progressive, instantaneous adhesion failure estimation under cyclic tensile stresses from a resistivity baseline. the method indicates that the in‑situ resistivity changes and the rate of the changes with strain, i.e. sensitivity, strongly correlate with the adhesion failure progression, irrespective of the cnt dispersion quality. Moreover, the effect of bond thickness on the evolution of piezo-resistivity and adhesion failure have been studied. It was observed that relatively thin adhesive bonds (0.18 mm thickness), possessing higher CNT contact points than thick bonds (0.43 mm thickness), provide 100 times higher sensitivity to varying cyclic loads.
Development of theoretical and experimental criteria for predicting the wear resistance of austenitic steels and nanostructured coatings based on a hard alloy under conditions of erosion-corrosion wear
Russian Foundation for Basic ResearchFind out more...
Notepeer-reviewed An Author Correction to this article was published on the 4/02/2021 and updated in ULIR on 09/02/2021, see file version 2.
Other Funding informationSFI, Cametics Ltd, European Union (EU)
Also affiliated with
- Bernal Institute
Department or School
- School of Engineering