Loading...
Benzene diazonium sulfonate modified nanoporous gold electrodes for the direct detection of Cu2+
Date
2020
Abstract
The detection of Cu2+ on surface modified nanoporous gold in aqueous solution is reported. Nanoporous gold electrodes were prepared with a wide range of pore sizes by dealloying of sputtered gold-silver alloys in concentrated nitric acid. Varying the pore sizes can significantly improve the electroactive surface area of the electrodes as well as protect the surface from biofouling materials, both necessary for the direct detection of trace metals in untreated samples. Two surface modifications i.e. a self-assembled monolayer of 3-mercapto-1-propanesulfonate and electro-grafted benzene diazonium sulfonate were evaluated. Underpotential deposition of Cu2+ and subsequent stripping of the deposited copper was achieved utilizing square wave voltammetry. The sensor was capable of accurately measuring Cu2+ concentrations in a range of water sample (tap, rain and river water) without the necessity of prior pre-treatment of the samples. The sensor had a linear range of 0.2 to 25 µM, which encompasses the accepted maximum limit for the concentration of copper in drinking water (20.5 µM). The sensitivity was 8.18 µA cm-2 µM-1 with a limit of detection of 18.9 nM (~1.2 ppb). The response of the sensor in artificial human serum was unaffected by the sample matrix, demonstrating the ability of the system to resist fouling by serum
Supervisor
Description
peer-reviewed
Publisher
John Wiley & Sons, Inc.
Citation
ChemElectroChem;7 (22), pp. 4625-4632
Collections
Files
Loading...
Magner_2020_Benezene.pdf
Adobe PDF, 1.26 MB
Keywords
ULRR Identifiers
Funding code
Funding Information
European Union (EU), European Research Council (ERC)